Rolling machine series
W12 series four-roller plate bending machine
Release time：2021-03-26 09:09 Pageviews：
The main technical parameters：
Main parts supporting manufacturers：
The purpose of the machine:
The W12 series four-roller plate rolling machine is mechanically lifted and rotated, and the upper stroke can be separated to take the material and lift the cap. Various special side wheels can be installed according to the requirements of customers to achieve the functions of lifting steel such as angle iron and network pipe.
Product shape and structure：
The W12 series four-roller plate bending machine is composed of a frame, an upper roller, a hydraulic system, a supporting roller, a lower roller, a sensor, and an electrical system. The frame part is composed of a left frame, a right frame, a base and a connecting beam, and the upper roller is composed of , The upper roller, the upper roller drive, three sets of supporting rollers, the upper roller beam, and the bearing body.
Working slide structure
The sliding block of W12 series four-roller plate bending machine is a mold component, which can slide perpendicular to the mold opening direction during the mold opening action. When the product structure prevents the mold from being demolded normally, the slider must be used. The material itself has the right hardness, wear resistance, and can withstand movement friction.
Hydraulic system：
The sealing device in the W12 series four-roller plate bending machine is generally used to prevent the leakage of working medium and the intrusion of external dust and foreign objects. The hydraulic system of the plate bending machine plays a sealing role.
Electrical control system：
The W12 series four-roller plate bending machine can operate the use of the equipment through the control loop control system. This loop is the electrical control system, which has the functions of start, stop, signal, measurement, and protection loops.
|
Slider synchronization control： The function of the synchronizer transmission slider of the W12 series four-roller bending machine is to push the synchronizer ring (copper ring) into the gear coupling tooth at the beginning of gear shifting, so that the taper hole of the synchronizer ring contacts and rubs against the taper shaft of the coupling tooth. , So that the copper ring rotates at a specific angle and continues to move in gear, and the slider will be pressed in (synchronizer hub) to complete its task.
|
|
Backgauge： The back gauge of W12 series four-roller bending machine can move smoothly on the linear guide rail, and can also be adjusted up and down, which is convenient, efficient and easy to control.
|
E21 system：
The E21 system has a high-definition LCD screen that displays programming parameters. The X and Y axes can be manually adjusted as required. It is easy to operate, has one-key parameter backup and recovery functions, supports multi-step programming, and passes EMC, high and low temperatures, vibration, etc. Strictly tested, stable and long service life.
