PB series economical CNC bending machine

■ The main technical parameters

■ Main parts supporting manufacturers

■ The purpose of the machine

PB series economical CNC bending machine is a machine for bending thin plates. The machine is an integral welding structure, and the bending machine is mainly formed by the upper mold. Point the edge with a sharp knife, press the dead edge by the flattening die, and press the arc with the R-mould, such as a door frame. Both the forming mold and the lace mold are directly formed.

■ Product shape and structure The PB series economical CNC bending machine workbench consists of a base and a pressing plate, which are placed on a support. The base is composed of a seat shell, a cover plate and a coil.

■ Working slide structure The PB series economical CNC bending machine slider is a mold component that can slide perpendicular to the mold opening direction during the mold opening action. When the product structure prevents the mold from being demolded normally, the slider must be used. The material itself has the right hardness, wear resistance, and can withstand movement friction.

■ Hydraulic system PB series economical CNC bending machine adopts the domestic famous brand hydraulic integrated system, which can change the pressure and increase the force. It is composed of power, execution, control, auxiliary, and hydraulic oil. It is mainly used to transmit power and movement. Small, high rigidity, fast response and large driving force.

■ Electrical control system PB series economical CNC bending machine can control the use of equipment through the control loop control system. This loop is the electrical control system, which has the functions of start, stop, signal, measurement, and protection loop.

■ Slider synchronization control The function of the synchronizer transmission slider of the PB series economical CNC bending machine is to push the synchronizer ring (copper ring) into the gear coupling tooth at the beginning of gear shifting, so that the taper hole of the synchronizer ring contacts the taper shaft of the coupling tooth. Friction, so that the copper ring rotates at a specific angle and continues to move in gear, the slider will be pressed in (synchronizer hub) to complete its task.

■ Backgauge The back gauge of PB series economical CNC bending machine can not only move smoothly on the linear guide, but also can be adjusted up and down, which is convenient, efficient and easy to control.

■ E21 system The E21 system of the PB series economical CNC bending machine has a high-definition LCD screen that displays programming parameters. The X and Y axes can be manually adjusted as required. It is easy to operate. It has a one-key parameter backup and recovery function, and supports multi-step programming. After strict EMC, high and low temperature, vibration and other tests, it is stable and has a long service life.